]> 1.2 ... This interior node is a placeholder for the 3GPP UMTS RF Metrics data. urn:oma:mo:oma-diag:RFParms_3GPP_UMTS:1.0 ServerID See [DiagMonTS] for description of this node. text/plain Description See [DiagMonTS] for description of this node. text/plain DiagMonConfig See [DiagMonTS] for description of this node. ConfigParms See [DiagMonTS] for description of this node. SaveLocation This leaf node indicates whether the location information is requested to be saved. text/plain GeoLocation This node acts as a placeholder for circular geographic locations. This node acts as a placeholder for one or more circular geographic locations. Lat This leaf node contains the latitude of the circular area as defined in [3GPP-TS_23.032], section 6.1. text/plain Long This leaf node contains the longitude of the circular area as defined in [3GPP-TS_23.032], section 6.1. text/plain Radius This leaf node contains the radius of the circular area as defined in [3GPP-TS_23.032], section 6.3. text/plain URAList This node defines the list of UTRAN Registration Areas. text/plain LAList This node defines the list of Location Areas. text/plain RAList This node defines the list of Routing Areas. text/plain CellList This node defines the list of cells. text/plain SampIntrvl This leaf node contains an integer value indicating the sampling interval in seconds at which Diagnostics and Monitoring data are collected on the device. text/plain ReportCondition This interior node acts as a placeholder to contain different reporting conditions which indicates when Diagnostics and Monitoring data is reported back to the Diagnostics and Monitoring System via Generic Alert and subsequent Get commands mechanism Frequency This leaf node contains an integer value indicating the frequency at which alert about Diagnostics and Monitoring data is reported back to the Diagnostics and Monitoring System. text/plain Ext This interior node allows for the extensions on report configurations. DiagMonData This node identifies the collected Diagnostics and Monitoring data, which SHOULD be retrieved by the Diagnostics and Monitoring System. This required node is a placeholder for the various collected RF data sets. PSC This node contains the 'Primary Scrambling Code', as defined by [3GPP-TS_25.213]. text/plain UARFCN This node contains the 'Downlink UTRA Absolute Radio Frequency Channel Number', as defined by [3GPP-TS_25.433]. text/plain CPICH_RSCP This node contains the 'Common Pilot Channel Received Signal Code Power', as defined by [3GPP-TS_25.215] and [3GPP-TS_25.225]. text/plain CPICH_Ec_No This node contains the ratio of the received energy per PN chip for the Common Pilot Channel to the total received noise power spectral density as defined by [3GPP-TS_25.215] and [3GPP-TS_25.225]. text/plain TxPwr This node contains a measure of the total transmit power, as defined by [3GPP-TS_25.215] and [3GPP-TS_25.225], 'UE Transmitted Power'. text/plain TransportChannel_BLER This node is a placeholder for the values of the transport channel block error rate measurements and channel IDs This node is a placeholder for the BLER measurements and channel ID. BLER This node contains the value of the 'Transport Channel Block Error Rate' as defined by [3GPP-TS_25.215] and [3GPP-TS_25.225]. text/plain TrChID This node contains the value of the 'Transport Channel Identity' as defined by [3GPP-TS_25.331]. text/plain UTRARSSI This node contains the value of the UTRAN Received Signal Strength Indication, as defined by [3GPP-TS_25.215] and [3GPP-TS_25.225], 'UTRA Carrier RSSI'. text/plain RxWBPwr This node contains the value of the total received wideband power, as defined by [3GPP-TS_25.215] and [3GPP-TS_25.225], 'Received total wide band power'. text/plain Location This optional leaf node contains the location where the measurements were taken, with the data encoded as per [3GPP-TS_23.032], section 7.3.1. text/plain CellID This node contains the value of the cell identifier. text/plain ProbDesc This node contains the text describing any problem that may have occurred during the measurement. text/plain Configuration This node contains the configuration of the UE at the time of measurement - this node may be used to store data from an error condition. text/plain Operations See [DiagMonTS] for description of this node. Start See [DiagMonTS] for description of this node. text/plain Stop See [DiagMonTS] for description of this node. text/plain Status See [DiagMonTS] for description of this node. text/plain Ext See [DiagMonTS] for description of this node.