Reference Release Definition for LWM2M_LOCKWIPE

Approved Version: 1.0.3 - 2021-01-19

Open Mobile Alliance

OMA-RRELD-LWM2M_LOCKWIPE-V1_0_3-20210119-A

main: 25 Jan 2021 15:51:00 rev: 6513d68

Unless this document is clearly designated as an approved specification, this document is a work in process, is not an approved Open Mobile Alliance™ specification, and is subject to revision or removal without notice.

You may use this document or any part of the document for internal or educational purposes only, provided you do not modify, edit or take out of context the information in this document in any manner. Information contained in this document may be used, at your sole risk, for any purposes. You may not use this document in any other manner without the prior written permission of the Open Mobile Alliance. The Open Mobile Alliance authorizes you to copy this document, provided that you retain all copyright and other proprietary notices contained in the original materials on any copies of the materials and that you comply strictly with these terms. This copyright permission does not constitute an endorsement of the products or services. The Open Mobile Alliance assumes no responsibility for errors or omissions in this document.

Each Open Mobile Alliance member has agreed to use reasonable endeavors to inform the Open Mobile Alliance in a timely manner of Essential IPR as it becomes aware that the Essential IPR is related to the prepared or published specification.
However, the members do not have an obligation to conduct IPR searches. The declared Essential IPR is publicly available to members and non-members of the Open Mobile Alliance and may be found on the “OMA IPR Declarations” list at https://www.omaspecworks.org/about/intellectual-property-rights/. The Open Mobile Alliance has not conducted an independent IPR review of this document and the information contained herein, and makes no representations or warranties regarding third party IPR, including without limitation patents, copyrights or trade secret rights. This document may contain inventions for which you must obtain licenses from third parties before making, using or selling the inventions. Defined terms above are set forth in the schedule to the Open Mobile Alliance Application Form.

NO REPRESENTATIONS OR WARRANTIES (WHETHER EXPRESS OR IMPLIED) ARE MADE BY THE OPEN MOBILE ALLIANCE OR ANY OPEN MOBILE ALLIANCE MEMBER OR ITS AFFILIATES REGARDING ANY OF THE IPR’S REPRESENTED ON THE “OMA IPR DECLARATIONS” LIST, INCLUDING, BUT NOT LIMITED TO THE ACCURACY, COMPLETENESS, VALIDITY OR RELEVANCE OF THE INFORMATION OR WHETHER OR NOT SUCH RIGHTS ARE ESSENTIAL OR NON-ESSENTIAL.

THE OPEN MOBILE ALLIANCE IS NOT LIABLE FOR AND HEREBY DISCLAIMS ANY DIRECT, INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF DOCUMENTS AND THE INFORMATION CONTAINED IN THE DOCUMENTS.

THIS DOCUMENT IS PROVIDED ON AN "AS IS" "AS AVAILABLE" AND "WITH ALL FAULTS" BASIS.

Copyright 2021 Open Mobile Alliance.

Used with the permission of the Open Mobile Alliance under the terms set forth above.

1. Scope

The scope of this document is limited to the Reference Release Definition of LwM2M_LOCKWIPE according to OMA Release process and the Enabler Release specification baseline listed in section 5.

2. References

2.1. Normative References

2.2. Informative References

3. Terminology and Conventions

3.1. Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

All sections and appendixes, except "Scope", "Release Version Overview" and "Conformance Requirements Notation Details", are normative, unless they are explicitly indicated to be informative.

3.2. Definitions

3.3. Abbreviations

Kindly consult [OMADICT] for more abbreviations used in this document.

4. Release Version Overview

The present Reference Release enables remote “lock and wipe” functionality in M2M devices

4.1. Version 1.0 Functionality

Version 1.0 defines the following functions:

1. Lock the M2M device – partially or fully
2. Unlock the M2M device
3. Wipe the M2M device – partially or fully
4. Report the result of the above operations

4.2. Version 1.0.3 Functionality

This revision adds the optional elements "LWM2MVersion" and "ObjectVersion" to the Object Lock & Wipe.

5. Document Listing for LwM2M LOCKWIPE 1.0.3

This section is normative.

6. OMNA Considerations

The present Reference Release consists of a new LwM2M Object. This LwM2M Object will be registered with the OMNA LwM2M Object registry.

7. API Considerations

Not Applicable.

Appendix A. Change History (Informative)

A.1 Approved Version History