Enabler Release Definition for LightweightM2M

Approved Version: 1.1 - 2018-07-10

Open Mobile Alliance

OMA-ERELD-LightweightM2M-V1_1-20180710-A

master: 06 Aug 2018 16:47:00 rev: 230b17c

Unless this document is clearly designated as an approved specification, this document is a work in process, is not an approved Open Mobile Alliance™ specification, and is subject to revision or removal without notice.

You may use this document or any part of the document for internal or educational purposes only, provided you do not modify, edit or take out of context the information in this document in any manner. Information contained in this document may be used, at your sole risk, for any purposes. You may not use this document in any other manner without the prior written permission of the Open Mobile Alliance. The Open Mobile Alliance authorizes you to copy this document, provided that you retain all copyright and other proprietary notices contained in the original materials on any copies of the materials and that you comply strictly with these terms. This copyright permission does not constitute an endorsement of the products or services. The Open Mobile Alliance assumes no responsibility for errors or omissions in this document.

Each Open Mobile Alliance member has agreed to use reasonable endeavors to inform the Open Mobile Alliance in a timely manner of Essential IPR as it becomes aware that the Essential IPR is related to the prepared or published specification. However, the members do not have an obligation to conduct IPR searches. The declared Essential IPR is publicly available to members and non-members of the Open Mobile Alliance and may be found on the “OMA IPR Declarations” list at https://www.omaspecworks.org/about/intellectual-property-rights/. The Open Mobile Alliance has not conducted an independent IPR review of this document and the information contained herein, and makes no representations or warranties regarding third party IPR, including without limitation patents, copyrights or trade secret rights. This document may contain inventions for which you must obtain licenses from third parties before making, using or selling the inventions. Defined terms above are set forth in the schedule to the Open Mobile Alliance Application Form.

NO REPRESENTATIONS OR WARRANTIES (WHETHER EXPRESS OR IMPLIED) ARE MADE BY THE OPEN MOBILE ALLIANCE OR ANY OPEN MOBILE ALLIANCE MEMBER OR ITS AFFILIATES REGARDING ANY OF THE IPR’S REPRESENTED ON THE “OMA IPR DECLARATIONS” LIST, INCLUDING, BUT NOT LIMITED TO THE ACCURACY, COMPLETENESS, VALIDITY OR RELEVANCE OF THE INFORMATION OR WHETHER OR NOT SUCH RIGHTS ARE ESSENTIAL OR NON-ESSENTIAL.

THE OPEN MOBILE ALLIANCE IS NOT LIABLE FOR AND HEREBY DISCLAIMS ANY DIRECT, INDIRECT, PUNITIVE, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF DOCUMENTS AND THE INFORMATION CONTAINED IN THE DOCUMENTS.

© 2018 Open Mobile Alliance All Rights Reserved. Used with the permission of the Open Mobile Alliance under the terms set forth above.

1. Scope

The scope of this document is limited to the Enabler Release Definition of LightweightM2M v1.1 according to OMA Release process and the Enabler Release specification baseline listed below.

2. References

2.1. Normative References

2.2. Informative References

3. LwM2M Release Version Overview

3.1. Version v1.0 Functionality

Lightweight M2M 1.0 enabler introduces the following features below for the initial release.

• Simple Object based resource model

• Resource operations of creation/retrieval/update/deletion/configuration of attribute

• Resource observation/notification

• TLV/JSON/Plain Text/Opaque data format support

• UDP and SMS transport layer support

• DTLS based security

• Queue mode for NAT/Firewall environment

• Multiple LwM2M Server support

• Basic M2M functionalities: LwM2M Server, Access Control, Device, Connectivity, Firmware Update, Location, Connectivity Statistics

3.2. Version v1.1 Functionality

Version 1.1 of the LwM2M protocol introduced the following new features:

• Enhancement of the LwM2M bootstrapping capabilities allowing for incremental upgrades.

• Improved support for Public Key Infrastructure (PKI) deployments.

• Introduction of enhanced registration sequence mechanisms by the LwM2M Client to LwM2M Server(s).

• Support for LwM2M over TCP/TLS to better support firewall and NAT traversal.

• Better support of LwM2M over Low Power WANs, including 3GPP CIoT & LoRaWAN.

• Extended LwM2M commands to enable Resource Instance level access.

• Performance improvement for retrieving and updating Resources of multiple objects.

• Support for JSON using SenML with CBOR serialization for compressed payload with highly efficient transmission.

• Addition of new data types.

4. Document Listing for LightweightM2M v1.1

5. Publication Considerations

5.1. OMNA Considerations

• LWM2M-v1_1.xsd new LightweightM2M schema for v1.1 protocol.

5.2. IANA Considerations

IANA has registered the following media types for use with LwM2M:

• application/vnd.oma.lwm2m+json
• application/vnd.oma.lwm2m+tlv

OMA is requesting IANA to register a new SenML Label for LwM2M object links in the "Sensor Measurement Lists (SenML) Parameters" registry, "SenML Labels" sub-registry:

• Name: Object Link Value
• Label: vlo
• JSON type: String
• XML type: string
• Reference: LwM2M TS v1.1

5.2.1. Publication of [LightweightM2M_TS_Core] and [LightweightM2M_TS_Transport]

The IANA Structured Syntax Suffix Registry requires a pointer to the latest revision of [LightweightM2M_TS]. That pointer needs to be stable, i.e. when OMA revises the document, there should be no need to update that link in the IANA registry. Due restrictions of the current standard publication process, publication of the [LightweightM2M_TS] in an additional location will be used to provide such a stable link for the IANA registry to refer to the latest TS for this Enabler, [LightweightM2M_TS]. The filename of the document referred by the IANA link is: OMA-TS-LightweightM2M-V1_1.zip. The document filename does not contain the date or document status.

5.2.1.1. Action required on publication (IANA)

In addition to the standard publication process, the documents [LightweightM2M_TS_Core] and [LightweightM2M_TS_Transport] has to be copied into the “Documents for External Reference” directory, and date and status have to be removed from the filename, such that it can be referenced externally as http://www.openmobilealliance.org/tech/extref/OMA-TS-LightweightM2M-Core-V1_1.zip or http://www.openmobilealliance.org/tech/extref/OMA-TS-LightweightM2M-Transport-V1_1.zip.

5.3. Actions Required on Publication of LwM2M v1.1 specifications

• None

Appendix A. Change History (Informative)

A.1 Approved Version History