LwM2M OBJECTS
LwM2M Objects define structured data models used for device management and service enablement in IoT ecosystems. These objects ensure interoperability by providing standardized configurations for sensors, actuators, and other connected devices. The OMNA LwM2M Object Registry maintains an authoritative list of approved objects, helping developers implement reliable LwM2M solutions. To register OMA LwM2M Resources, please raise a GitHub issue at OMA LwM2M Registry - README file. Go directly to the LwM2M Objects Registry
ObjectID CLASSES
ObjectID Classes categorize LwM2M Objects based on their origin and intended use. Each class has a defined ID range, ensuring unique allocation and proper registration within the OMNA LwM2M ecosystem. The classification includes OMA-defined objects, third-party standards, vendor-specific assignments, and reserved spaces for testing or future use.
Note: Final allocation of ObjectIDs is managed by OMNA staff.
OMNA LwM2M OBJECTS
The OMNA LwM2M Object Registry ensures interoperability by listing approved LwM2M objects, providing a reliable reference for developers to support device management and IoT service deployment.
Explore the OMNA LwM2M Object Registry—your trusted resource for managing and deploying LwM2M objects efficiently. This registry provides a centralized list of approved objects, ensuring interoperability, compliance, and seamless integration for IoT solutions. Visit README file in GitHub to register new objects or browse existing ones to enhance your LwM2M deployments.
OMA LwM2M Registry (Objects)
- Companies or individuals154
- OMA Labels65
- Standards Organizations Labels245
- Connected UE Report1
- 3-Phase Power Meter1
- 5GNR Connectivity1
- APP1
- AT Command1
- AT&T Connectivity Extension2
- Accelerometer2
- Acidity2
- ActiveCmdhPolicy1
- Actuation2
- Addressable Text Display1
- Air quality2
- Altitude2
- Analog Input2
- Analog Output2
- Anemometer1
- App Data Container1
- App Fota Container1
- Arm1
- Audio Clip1
- Barometer2
- Battery2
- Battery Level Readings1
- BinaryAppDataContainer1
- Bitmap2
- Buzzer2
- CCU1
- CCU Control1
- CCU PM1
- CO Detector1
- Calendar Rule1
- Camera1
- Cellular Network and Bearer Control1
- Chassis1
- CmdhBackOffParametersSet1
- CmdhBuffer1
- CmdhDefEcValues1
- CmdhDefaults1
- CmdhEcDefParamValues1
- CmdhLimits1
- CmdhNetworkAccessRules1
- CmdhNwAccessRule1
- CmdhPolicy1
- CoAP Config1
- Collision Sensor1
- Colour2
- Communications Activity Time Readings1
- Communications Characteristics1
- Compact Composite1
- Compressor1
- Concentration2
- Conductivity2
- Confidential Data1
- Connected UE Measurements1
- Connectivity Monitoring4
- Connectivity Statistics1
- CrowdBox Measurements1
- Current2
- Current Logging1
- Current Loop Input1
- Current Loop Output1
- DYM IoT edge commands and data protocols1
- Daily Maximum Flow Rate Readings1
- Data Monitoring1
- Daughter Board Failure Alarm1
- Delivery Schedule1
- Depth2
- DevCapMgmt2
- Device3
- Device Extension2
- Device Metadata1
- Device RF Capabilities1
- Device Reboot Event1
- Digital Input2
- Digital Output2
- Dimmer1
- Direction2
- Discharge1
- Discharge Alarm1
- Discharge Status1
- Distance2
- Distributed Sensor Group1
- Distributed Sensor Message1
- Door1
- Drop Sensor1
- ECID-Signal Measurement Information1
- ECU1
- Edge Application Server Configuration1
- Edge computing generic condition1
- Edge computing manager1
- Edge computing script1
- Edge computing time condition1
- Electrical Conductivity Alarm1
- Electrical Conductivity Readings1
- Electrical monitor2
- Energy2
- Event1
- Event Data Delivery1
- Event Log3
- Event Profile1
- Fan1
- Fan PM1
- Fault Code1
- Filling level2
- Fire Alarm1
- Firmware Update3
- Frequency2
- GPS1
- Gas Readings1
- Gas meter2
- Gas-Dust Sensor1
- General Info1
- Generic Sensor2
- Global Navigation Satellite System2
- Gyrometer2
- Heat / Cooling meter1
- High Temperature Alarm1
- HostDevice1
- HostDeviceInfo1
- Humidity2
- Humidity Sensor1
- IMU1
- Illuminance2
- Input Filter1
- Interval Data Delivery1
- Irrigation valve2
- LED color light1
- LPWAN Communication1
- LPWAN Mesh Connectivity1
- LPWAN Mesh Statistics1
- LTE-MTC Band Config1
- LWM2M APN Connection Profile2
- LWM2M Bearer Selection2
- LWM2M Cellular Connectivity2
- LWM2M Meta Object1
- LWM2M OSCORE3
- LWM2M Security3
- LWM2M Software Component1
- LWM2M Software Management1
- Leakage Detection Configuration2
- Leg1
- LiDAR1
- Light1
- Light Control1
- Load2
- Load Control2
- Location4
- Lock1
- Lock and Wipe1
- Loudness2
- Low Battery Alarm 1
- Low Temperature Alarm1
- Luminaire asset1
- LwM2M Access Control2
- LwM2M COSE1
- LwM2M Gateway2
- LwM2M Gateway Routing1
- LwM2M SIM Provisioning1
- LwM2M Server3
- LwM2M v1.0 Test Object1
- LwM2M v1.1 Test Object1
- MCU1
- MIC1
- MQTT Broker1
- MQTT Publication1
- MQTT Server1
- Magnetometer2
- Manhole1
- Manhole Cover1
- Manifest1
- Measurement Metadata1
- Message3Report1
- Modbus Connection1
- Modbus Register Cluster1
- Multi-state Selector2
- Multiple Axis Joystick1
- NeighborCellMeasurements1
- Neighbour Cell Report1
- Network Info1
- Network Speed Test2
- Noise sensor2
- Non-Access Stratum (NAS) Configuration1
- On/Off switch2
- Outdoor lamp controller2
- Output Filter1
- PM1
- PM Threshold1
- PagingDRX1
- Parking Sensor2
- Particulates1
- PbchDecodingResults1
- People counter2
- Percentage2
- Periodic Activity1
- Periodic Sensor Sampler2
- Periodic Sensor Upload2
- Photocell2
- Portfolio1
- Positioner2
- Power2
- Power Control2
- Power Factor2
- Power Measurement2
- PrachReport2
- Presence2
- Presence Alarm1
- Pressure2
- Pressure Readings1
- Pressure Transient1
- Pressure monitoring sensor2
- Program Function1
- Program Manager1
- Program Monitor1
- Program Scheduler1
- Push button2
- RCU1
- RCU Control1
- RCU PM1
- RDB1
- Rain Gauge1
- Rate2
- Reboot Status1
- Relay Management1
- Remote SIM Provisioning1
- Robot1
- Robot Alarm1
- Robot Control1
- Robot PM1
- Robot Selfcheck Info1
- Robot Service Info1
- Roll over sensor1
- Runtime Database1
- SCA1
- SCA PM1
- Screen1
- Sensor Alarm1
- Sensor Group Device Capabilities1
- Service Info1
- ServingCellMeasurement1
- Servomotor1
- Set Point2
- Shareparkinglot1
- Single-Phase Power Meter2
- Single-phase electrical meter2
- SipRegistrationEvent1
- Smoke Alarm1
- Solar Radiation2
- Speaker1
- SpringMotor1
- Stopwatch2
- Stream Gauge1
- System Log1
- TBD11
- Temperature2
- Temperature Readings1
- Temperature Sensor1
- Thermal Imager1
- Thread CLI Command1
- Thread Commissioning (joiner add)1
- Thread Neighbor Information1
- Thread Network1
- Three-phase electrical meter complement1
- Tilt Alarm1
- Tilt Readings1
- Tilt sensor2
- Time2
- Time Synchronisation Event1
- Time synchronization2
- Timer1
- TimingAdvance1
- Traffic Counter2
- Trend Alarm1
- Trend Readings1
- Tripod Head1
- Ultrasonic Sensor1
- Up/Down Control1
- Valve Alarm1
- VehicleControlUnit1
- Vendor Specific Measurement Quality Reason1
- Virtual Observe Notify2
- VoLTErtpPacketLoss1
- Voltage2
- Voltage Logging1
- Voltage Transient1
- VolteCallEvent1
- WLAN connectivity2
- Warning Light1
- Water Flow Readings1
- Water Level Alarm1
- Water Level Readings1
- Water Meter Customer Leakage Alarm1
- Water Meter Empty Pipe Alarm1
- Water Meter High Pressure Alarm1
- Water Meter Low Pressure Alarm1
- Water Meter Reverse Flow Alarm1
- Water Meter Tamper Alarm1
- Water Network Leak Alarm1
- Water Tank1
- Water meter2
- Water quality sensor2
- Wet Bulb Globe Temperature1
- Wheel1
- cellBlacklistEvent1
- cellReselectionEvent1
- eSIM IoT1
- emmFailureCauseEvent1
- emmStateValue1
- esmContextInfo1
- handoverEvent1
- macRachAttemptEvent1
- macRachAttemptReasonEvent1
- macTimerStatusEvent1
- macTimingAdvanceEvent1
- nasEmmTimerExpiryEvent1
- nasEsmExpiryEvent1
- nuSIM1
- nuSIM Profile1
- oA Basic Control1
- oA Device1
- oA Group1
- oA Logical Colour Light-Point Actuator1
- oA Logical Colour Temperature Light-Point Actuator1
- oA Logical Illuminance Sensor1
- oA Logical Light-Point Actuator1
- oA Logical Presence Sensor1
- oA Logical Push-Button Sensor1
- oA OGC-Security1
- oA Physical Colour Light-Point Actuator1
- oA Physical Colour Temperature Light-Point Actuator1
- oA Physical Illuminance Sensor1
- oA Physical Light-Point Actuator1
- oA Physical Presence Sensor1
- oA Physical Push-Button Sensor1
- oA Receiving Object1
- oA Reporting Object1
- oA Scene1
- oA Status Report Structure1
- plmnSearchEvent1
- powerupLog1
- pucchPowerControl1
- rachLatency_delay1
- radioLinkFailureEvent1
- radioLinkMonitoring1
- rrcStateChangeEvent1
- rrcTimerExpiryEvent1
- scellID1
- sipPublishEvent1
- sipSubscriptionEvent1
- txPowerBackOffEvent1
- txPowerHeadroomEvent1
- uCIFI Generic Actuator2
- uCIFI data bridge2
- volteCallStateChangeEvent1
- ARM Limited2
- AT&T3
- AVSystem2
- Casa Systems3
- Cisco1
- CloudMind1
- CloudMinds48
- Comsel System Ltd1
- CoudMinds2
- DYM Labs1
- Eclipse Foundation2
- Ericsson1
- GSMA38
- George Kent Malaysia2
- Huawei1
- Huawei Technologies1
- Huawei Technologies Co., Ltd.1
- HydroQuebec4
- IPSO Alliance100
- IoT Connectivity Alliance2
- IoTerop2
- Itron2
- Lab R&D Atos Pessac1
- OMA64
- Odins3
- OpenAIS20
- OpenLX SP Ltd1
- Sierra Wireless1
- South East Water1
- South East Water Corporation44
- TAU1
- TBD8
- Test WG1
- Vaisala2
- Verizon Wireless1
- Vodafone3
- Vodafone Group Services Ltd5
- Works System1
- World-Direct eBusiness2
- XiangYiIOT Technologies1
- autosen5
- oneM2M10
- uCIFI69
- 1.0364
- 1.173
- 1.25
- 1.31
- 2.020
- 2.11
URN | Version | XML Name | LwM2M Editor | Technical Specification | Description | |||
---|---|---|---|---|---|---|---|
urn:oma:lwm2m:oma:0 | 0 | 0 | LWM2M Security | Test WG | 1.0 | This LwM2M Object provides the keying material of a LwM2M Client appropriate to access a specified LwM2M Server. One Object Instance SHOULD address a LwM2M Bootstrap-Server. These LwM2M Object Resources MUST only be changed by a LwM2M Bootstrap-Server or Bootstrap from Smartcard and MUST NOT be accessible by any other LwM2M Server. | |
urn:oma:lwm2m:oma:0:1.1 | 0 | 0 | LWM2M Security | OMA | 1.1 | This LwM2M Object provides the keying material of a LwM2M Client appropriate to access a specified LwM2M Server. One Object Instance SHOULD address a LwM2M Bootstrap-Server. These LwM2M Object Resources MUST only be changed by a LwM2M Bootstrap-Server or Bootstrap from Smartcard and MUST NOT be accessible by any other LwM2M Server. | |
urn:oma:lwm2m:oma:0:1.2 | 0 | 0 | LWM2M Security | OMA | 1.2 | This LwM2M Object provides the keying material of a LwM2M Client appropriate to access a specified LwM2M Server. One Object Instance SHOULD address a LwM2M Bootstrap-Server. These LwM2M Object Resources MUST only be changed by a LwM2M Bootstrap-Server or Bootstrap from Smartcard and MUST NOT be accessible by any other LwM2M Server. | |
urn:oma:lwm2m:oma:1 | 1 | 1 | LwM2M Server | OMA | 1.0 | This LwM2M Objects provides the data related to a LwM2M Server. A Bootstrap-Server has no such an Object Instance associated to it. | |
urn:oma:lwm2m:oma:1:1.1 | 1 | 1 | LwM2M Server | OMA | 1.1 | This LwM2M Objects provides the data related to a LwM2M Server. A Bootstrap-Server has no such an Object Instance associated to it. | |
urn:oma:lwm2m:oma:1:1.2 | 1 | 1 | LwM2M Server | OMA | 1.2 | This LwM2M Objects provides the data related to a LwM2M Server. A Bootstrap-Server has no such an Object Instance associated to it. | |
urn:oma:lwm2m:oma:2 | 2 | 2 | LwM2M Access Control | OMA | 1.0 | Access Control Object is used to check whether the LwM2M Server has access right for performing an operation. | |
urn:oma:lwm2m:oma:2:1.1 | 2 | 2 | LwM2M Access Control | OMA | 1.1 | Access Control Object is used to check whether the LwM2M Server has access right for performing an operation. | |
urn:oma:lwm2m:oma:3 | 3 | 3 | Device | OMA | 1.0 | This LwM2M Object provides a range of device related information which can be queried by the LwM2M Server, and a device reboot and factory reset function. | |
urn:oma:lwm2m:oma:3:1.1 | 3 | 3 | Device | OMA | 1.1 | This LwM2M Object provides a range of device related information which can be queried by the LwM2M Server, and a device reboot and factory reset function. |